Loading... Please wait...

Connect with us

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5

LED Rope Light Per Foot

In Stock - Ships within 24 Hours
Calculated at checkout

Product Description

3/8" LED Rope Lighting (LED Rope Light is sold by the linear foot). Our LED Rope Light is sold by the Foot. If you require 50' for example, you would enter 50 in the Quantity field above the Add To Cart button. If you need multiple sections, you can simply add them all up and order the overall length and cut it down to size once you receive it. The LED Rope Light can be cut with a pair or scissors at every 6". 

For each section of LED Rope Light you will also need a Power Cord Kit, a End Cap and perhaps some Clips to help keep it secure in place. Zip ties can also be used to hold the LED Rope Light in place.

Powering the LED Rope Light is simple. Simply connect the Power Cord to a 12VDC or 24VDC (depending on model purchased). Power can come from a DC battery (standard marine or automotive batter) or a LED Driver if working with 120VAC circuits. Be sure to never connect the Low Voltage LED Rope Light to 120V/220V.

Special note for residential/commercial building use: 

Our low voltage (12V or 24V) LED rope light may also be used for residential/commercial use as well. However, it will not be supplied with an AC adapter or other means for stepping the voltage down as that must be ordered separately. Please visit our Power Supply page for a selection of both AC transformers and AC to DC LED converters. 


LED Bulb Color: Cool White, Warm White, Red, Green or Blue
Power Consumption: 0.87W/foot
Amp Draw: 0.02A/ft  
Voltage: 12VDC/24VDC
Bulb Spacing: 1"
Bulb Orientation: Horizontal
Pricing Units: Per Foot
Recommended Air Temp: Range -4° to 122° F
Cutability: Every 6"
Maximum Run Length: 65'
Safety Standards Compliance: CE_EMC
Safety Standards Compliance: CE-EMC, UL 2388

The following required parts must be purchased separately to complete your rope light installation:

For 12/24VDC input (from battery, DC breaker panel or DC power supply):

ILMDL-CONKIT-6: Connector Kit for 3/8"LED Rope Light (Connector & 6' Cord)



Product Videos

LED Rope Light installation by YachtLights.com 03:03

LED Rope Light installation by http://www.YachtLights.com

  • LED Rope Light...
    LED Rope Light installation by http://www.YachtLights.com

Other Details

12VDC or 24VDC
.55W per foot
Switch Built-in:

Customers also viewed

  • LED Waterproof Ribbon 16' Roll
  • LED SeaStrip 20-Inch Waterproof HIGH OUTPUT
  • Power Cord Kit
  • Halogen Metal Puck Light
  • FREE 2015 Marine Lighting Catalog

Related Products

  • End Cap
  • T-Connector
  • Power Cord Kit
  • Easy Splice
  • Mounting Clip
  • Conduit Clip
  • Mounting Track
See Apex Lighting Reviews at Bizrate.com