LED Rope Light Per Foot
3/8" LED Rope Lighting (LED Rope Light is sold by the linear foot). Our LED Rope Light is sold by the Foot. If you require 50' for example, you would enter 50 in the Quantity field above the Add To Cart button. If you need multiple sections, you can simply add them all up and order the overall length and cut it down to size once you receive it. The LED Rope Light can be cut with a pair or scissors at every 6".
For each section of LED Rope Light you will also need a Power Cord Kit, a End Cap and perhaps some Clips to help keep it secure in place. Zip ties can also be used to hold the LED Rope Light in place.
Powering the LED Rope Light is simple. Simply connect the Power Cord to a 12VDC or 24VDC (depending on model purchased). Power can come from a DC battery (standard marine or automotive battery) or a LED Driver if working with 120VAC circuits. Be sure to never connect the Low Voltage LED Rope Light to 120V/220V.
Special note for residential/commercial building use:
Our low voltage (12V or 24V) LED rope light may also be used for residential/commercial use as well. However, it will not be supplied with an AC adapter or other means for stepping the voltage down as that must be ordered separately. Please visit our Power Supply page for a selection of both AC transformers and AC to DC LED converters.
LED Bulb Color: Cool White, Warm White, Red, Green or Blue
Power Consumption: 0.87W/foot
Amp Draw: 0.02A/ft
Bulb Spacing: 1"
Bulb Orientation: Horizontal
Pricing Units: Per Foot
Recommended Air Temp: Range -4° to 122° F
Cutability: Every 6"
Maximum Run Length: 65'
Safety Standards Compliance: CE_EMC
Safety Standards Compliance: CE-EMC, UL 2388
The following required parts must be purchased separately to complete your led rope lights installation:
For 12/24VDC input (from battery, DC breaker panel or DC power supply):
LED Rope Light installation by http://www.YachtLights.com
LED Rope Light...LED Rope Light installation by http://www.YachtLights.com