| |
|---|
| Dimensions |
170mm (6.70") x 80mm (3.15") x 40mm (1.58") |
| Input Voltage Range |
9-33VDC |
| Max. Wattage |
12V/250W, 24V/500W |
| Dimming Voltage Range |
10-98% of input voltage |
| Standby Current Draw |
10mA |
| Complete Off |
Yes |
| No. of Switches |
Unlimited (not supplied with dimmer) |
| Dimmer Type |
Remote/Digital/Push-Button |
| Control Type |
Momentary Push-Button |
| Operating Temperature |
-25 dg C to +45 dg C |
| Housing |
Marine Grade Aluminum dye anodized with ABS molded end caps |
| Classifications |
EMC - Australian C Tick mark and CE mark |
| Details |
- Soft-start function: Prolongs Bulb Filament Life
- Memory function that records last light-level setting so same brightness is resumed when turned on again
- Master/slave function that allows either dimmer to act as the master or the remote allowing unlimited power potential.
- Multi Voltage Capable (9-33VDC)
- Supports unlimited numbers of momentary push-button switches
- Diagnostic indicator via color code LED (standby mode, load on, short circuit & over temperature warning)
- Protections: transient voltage, short circuit and over temperature
- These dimmers are controlled by any "normally-open" single pole single throw momentary switches (any brand).
|
