BluefinLED Piranha P6 LED Color Changing
Piranha P6 Color Changing LED Underwater Light
The Bluefin LED Piranha P6 LED Color Changing now with 30% more power and improved software & electronics for 2016. With almost infinite color choice the Piranha P6 Color Change LED Underwater Boat Light gives you the flexibility to express yourself and showcase your boat in the best possible way. Lights are controlled via a simple on/off toggle switch (not supplied). Suitable for all types of boats, perfect for transom and side mounting on all hull types. Incredibly simple to install just one small cable entry hole and 3 mounting screws, reverse polarity protection. This light comes within built driver technology allowing simple and easy installation. Guard X protective coating prevents marine growth build up on the polymer lens. Suitable for use in and out of water thanks to Active Thermal Rollback Protection.
Can I run these lights out of the water?
Answer: Yes, although we recommend installing these lights under the water, they can be used outside the water without causing any harm to them. They have a built-in overheat protection that will dim them down to 50% intensity until they cool at which point they will resume at 100% intensity.
Can I wire all more than one light to one switch?
Answer: Yes, you can wire as many lights as you need to a single switch as long as you don't exceed the switch's AMP rating. Each light draws 2.5 Amps, so 4 lights would require a switch with at least a 10 Amp rating (most switches are 20-30 Amps).
What size boat is this light recommended for?
Answer: This light is recommended for boats up to 14m/45ft.
Voltage: 12 VDC
Current: 2.0A @ 12VDC
Colors: Color Changing (toggle switch On/Off to cycle thru colors)
Lumens: 2700 Lumens
Hole Cut-Out for cable: 3/8"
Lens: optical grade high impact polymer, 60 degree beam angle Body: Composite w/ guard X coating prevents marine growth
Country of Origin: Made in UK
Details: The Piranha P6 Underwater Light strikes fear into the heart of its competitors, small yet ferociously powerful the compact low profile design makes the Piranha P6 the perfect choice for all types of boats and is suitable for transom and side mounting on all hull types. No controller required. Incredibly simple to install just one small cable entry hole and 3 mounting screws. Reverse polarity protection within built driver technology and active thermal control.