null

Apex Recessed LED Puck Light - 12V Warm White

Brand :

$25.95
SKU:
6244-SN
Availability:
In Stock - Ships within 24 Hours
Shipping:
Free Ground Shipping (orders over $199)

SMALL LIGHT. A WARMER SPACE.

A simple finishing touch for your interior.

The Apex LED Puck Light provides warm white illumination in a compact recessed fixture for dry interior spaces. Use it for boat cabins, cabinets, shelving or under-cabinet lighting where a small round light fits the design. Choose Satin Nickel, White or Black to coordinate with the surrounding fittings, and connect it to a suitable 12 V DC supply.

01 / LIGHT

Bring warmth to the space.

Warm White LEDs provide 2700 K light. The fixture is rated at 3 W and operates from a constant-voltage 12 V DC supply.

02 / FINISH

Coordinate the details.

Choose a Satin Nickel, White or Black metal finish. The finish changes the fixture’s appearance; each option in this listing uses Warm White LEDs.

03 / INSTALL

Recess the body into the surface.

The listing specifies a 2.25-inch mounting opening. Check the existing opening, available depth and wiring access before replacing another fixture.

THE DETAILS THAT MATTER

Specifications

Brand Apex
Supply voltage 12 V DC
LED color Warm White
Color temperature 2700 K
Rated power 3 W
Calculated current at 12 V DC Approximately 0.25 A (250 mA)
Ingress protection IP44
Light source SMD LED
Body / lens Iron body with frosted glass
Fixture body Metal
Available finishes Satin Nickel, White, Black
Mounting Recessed
Mounting opening 2.25 in
Dimming With a compatible low-voltage LED dimmer
Wire supplied 6-inch leads
Warranty 1 year

Current is calculated from the 3 W rating at 12 V DC (3 ÷ 12), not a separate measured specification. No lumen output is stated on the linked manufacturer page.

CHOOSE THE FINISH

Three looks. The same Warm White light.

Satin Nickel

A soft metallic finish for coordinating with brushed or satin-finish hardware.

White

A clean trim for light-colored cabinets, ceilings and interior panels.

Black

A dark trim for coordinating with black fittings or creating contrast against a lighter surface.

Select the required finish above before adding the light to your cart.

LIGHT WHERE YOU NEED IT

Made for dry interior spaces.

Boat cabins

Use recessed lighting in suitable dry cabin surfaces and interior overhead panels. Check the available space and electrical supply.

Cabinets and shelving

Add light inside cabinetry or above a display area. Keep wiring protected and accessible for service.

Under-cabinet lighting

Illuminate a counter or work area from above. Plan light positions around the usable area and the mounting material.

This light is not waterproof. Choose a protected, dry location away from splashes and water exposure. It is not an underwater light.

CHECK YOUR FIT

Product dimensions

Face diameter 70 mm (approximately 2.76 in)
Mounting opening, listing 2.25 in
Overall depth 20 mm (approximately 0.79 in)
Wire leads 6 in

Measure the existing opening and confirm the face will cover it. Leave additional room for wire connections and the mounting arrangement. Check the actual fixture before cutting a new opening.

PLAN THE RECESS

Dimension drawing

Apex recessed puck light dimension drawing showing a 2.80-inch face diameter, 2.25-inch upper body dimension and 0.85-inch overall depth.

POWER AND DIMMING

A 12-volt light needs a 12-volt supply.

Connect the light to a suitable 12 V DC source. If your installation starts with household AC power, use an appropriate AC-to-12 V DC LED power supply. Check compatibility when replacing a halogen fixture; an existing halogen transformer may not be suitable for the new LED load.

Want to dim the light?

Use a compatible low-voltage LED dimmer and confirm it works with the selected supply and light. Check the dimmer’s load range when installing one light or a small group.

Do not connect directly to 120 V AC or to a 24 V DC circuit. Follow the wiring information supplied with the light and maintain correct polarity.

READY FOR YOUR INSTALL

What’s in the box?

  • 1 × Apex LED Puck Light
    In your selected Satin Nickel, White or Black finish, with Warm White LEDs.
  • 6-inch wire leads

A power supply and dimmer are not listed as included. Select suitable equipment for your installation.

PLAN BEFORE YOU CUT

Three checks for a cleaner installation.

1 / Confirm the opening

Check the 2.25-inch mounting requirement against the existing opening. Verify that the trim covers any old mounting marks.

2 / Check the space

Allow room for the fixture body, mounting arrangement and wiring behind the surface. Choose a dry location.

3 / Verify the power

Disconnect power before wiring. Confirm a suitable 12 V DC supply, correct polarity and appropriately protected connections.

The product supplied in this listing is for recessed mounting. Do not assume a surface-mount adapter is included. Use the instructions for the actual light and have the installation completed by a qualified person where appropriate.

BEFORE YOU ORDER

Common questions

Is this a 12 V or 24 V light?

It requires 12 V DC. Do not assume it supports a 24 V circuit or direct household AC power.

Can I use it in an exposed location on my boat?

No. This listing identifies the fixture as not waterproof. Use it in dry, protected interior locations.

Are the three finishes different LED colors?

No. Satin Nickel, White and Black describe the fixture finish. The light in this listing is Warm White.

Can it replace a halogen puck light?

It may suit the application, but check the opening, trim coverage, available depth and supply compatibility first. Replacing the fixture does not guarantee the existing halogen transformer will work with it.

Is it dimmable?

The listing specifies dimming with a compatible LED dimmer. Confirm the light, dimmer and power supply work together, including at the intended total load.

Is surface-mount hardware included?

No surface-mount adapter is listed as included. This product is supplied for recessed installation.

Is this a complete multi-light kit?

No. The listing is for one puck light in the selected finish. Plan any additional lights, power supply, dimmer and installation wiring separately.

Does it produce no heat?

No. LEDs can still become warm during operation. Follow the supplied mounting instructions and keep the fixture suitable for its surroundings.

1-Year Warranty